Loading...
    • The machine frame construction is calculated by computer to analyze stress/strain conditions. It is one-piece welded from high tensile steel, and stress rollovod to encure lifetime repeatability accuracy.
    • The external of the machine is equipped with a heat isolated sheet metal. It allows the remaining heat to be exhausted through an air exhaust system, that avoids over-temperature in working area.
    • The heating platen is manufactured from special steel plate to avoid machine deformation even operating at 400°C. The heating platen is machined and ground through several processes. Flatness and parallelism accuracy on a single platen can reach ±0.015mm/m. Also, temperature tolerance can be controlled with in ±1.5°C.
  • Panel Capability

    • Thinckness 1-12mm (Customized Rack for <1mm ) Standard 22x27' (32pnl) Max. 27x44' (16pnl)

    • Cycle Time Desmear 20-30min

    • Desmear+Activation 30-45min

    • Throughput# Desmear 64-98 pnl/hour

    • Desmear+Activation 32-48 pnl/hour

    • Uniformity >80% 5 or 9 Points per cell, 3 cells(Left,Middle,Right)

    • Etch(Desmear) Rate >0.3um/min

    • CF4 Consumption 3%-8% (Desmear)

    • Pump down performance Ultimate<30mT, Leak Rate<20mT/min; Process Pressure 200-300mT

    • RF generator 10KW/40KHz

    • Purged N2 Purity 99%

    • Heating up 1-2℃/min; (proprietary design for minimized heating tim

  • FCM-30 auto cut laminator

    In the manufacturing process of printed circuit boards, the device laminates a photosensitive dry film to copper, which is part of the wiring pattern creation process and is an important part of the electronics manufacturing industry.

  • FCM-30h auto cut laminator FCM-30H HDI dedicated ICS25 IC carrier board dedicated FCM-30HH thick plate dedicated FCM-30 Plus large size FCM-30LH backplane dedicated
  • Sheet to sheet dry film auto cutting laminator

    A small, lightweight motor with a new generation of microstepping drives, with less vibration and noise, a high-speed motor drives a disc cutter with a precision ball spline to move linearly left and right, all in order to determine the cutting process. The dry film debris generated in the product improves the yield of the product.

    • The flexible micro drilling and precision routing machine.
    • Two independent heads – Each head can be configured with a dedicated drilling and routing spindle
    • Large Format 915x760mm (36.00×30.00″)
    • All axis driven by linear motor for speed and accuracy.
    • Table runs on gantry system for maximum performance and positioning control.
    • High speed spindles up to 250k rpm for micro drilling.
    • High torque routing spindles from 5k to 125K rpm for heavy duty routing to precision routing.
    • Depth control drilling and routing using contact surface sensing, linear scale and mapping.
    • HD CCD Camera with RGB lighting registration solutions for flip drilling, back drilling and sequential build up applications.
    • High capacity tool holder with 1300 positions per spindle operated independently from machine
    • Code reader for panel/job recognition
    • Automatic loading unloading system to run the machine unmanned.
    • The flexible micro drilling and precision routing machine for Large Format (1390x960mm – 55.00×30.00″ standard).
    • All axis driven by linear motor for speed and accuracy.
    • Table runs on gantry system for maximum performance and positioning control.
    • High speed spindles up to 250k rpm for micro drilling.
    • High torque routing spindles from 5k to 150K rpm for heavy duty routing to precision routing.
    • Depth control drilling and routing using contact surface sensing, linear scale and mapping.
    • Camera registration solutions for flip drilling, back drilling and sequential build up applications.
    • Automatic loading unloading system with bar code recognition to run the machine unmanned.
    • The micro drilling and precision routing machine.
    • Two stations
    • Generous working area 635x760mm (25.00×30.00″)
    • All axis driven by linear motor for speed and accuracy.
    • Table runs on gantry system for maximum performance and positioning control.
    • High speed spindles up to 250k rpm for micro drilling.
    • High torque routing spindles from 5k to 150K rpm for heavy duty routing to precision routing.
    • Depth control drilling and routing using contact surface sensing, linear scale and mapping.
    • Camera registration solutions for flip drilling, back drilling and sequential build up applications.
    • Automatic loading unloading system with bar code recognition to run the machine unmanned.
    • The micro drilling and precision routing machine.
    • Three stations
    • Working area 710x460mm (28×18″)
    • All axis driven by linear motor for speed and accuracy.
    • Table runs on gantry system for maximum performance and positioning control.
    • High speed spindles up to 250k rpm for micro drilling.
    • High torque routing spindles from 5k to 150K rpm for heavy duty routing to precision routing.
    • Depth control drilling and routing using contact surface sensing, linear scale and mapping.
    • Camera registration solutions for flip drilling, back drilling and sequential build up applications.
    • Automatic loading unloading system with bar code recognition to run the machine unmanned.
  • Panel Information Panel sizes: 305*355mm~545*627mm(12*14~21.5*24.7) Thickness: 0.05mm~3.2mm Artwork dimensions:585mm*685mm(23”x27”)" UV Light Source Light source: LED source Light uniformity:≥85%" Exposure Method Glass vs Glass Dual Drawers Control Method PC Based plus motion card control Room Requirements Clean Room:21℃±3℃;55%±5% RH Dry film Resolution Dry film:2.6/2.6mil Throughput 2.5-3.5 panels/min(without panel handlings) Air Pressure 5.5kg 120L/min Cooling Water 1.0kg 120L/min 24℃ Power Requirement AC ¢220V 32A (PE wire) Artwork Alignment System CCD quantity: 4CCD Panel attachment: Auto alignment Auto artwork alignment Pre-registration: pin hole ¢3.0mm pin Artwork attachment: Vacuum Alignment accuracy: 3σ≤20μm" Power consumption Working condition 5KW/H &standby 0.5KW/H Dimension "2950*1450*1820mm (LED light box fixed position) Optional: 2300*1450*1820mm(LED light box moving method) Machine SST panels"
  • The most advanced solution for high tech application A toolkit for your most complex multilayers boards Two independent heads Each can be configured with a dedicated spindle Flexible table configuration for 1 station or 2 stations Drilling, routing, x-ray optimiser (outer-layers and inner-layers), coordinates measures Real-time drilling assisted by x-ray targets detection Statistical analysis, graphics, reports All axis is driven by a linear motor for speed and accuracy. High speed spindles up to 250k rpm for micro drilling. Routing spindles up to 150K rpm for precision routing. Depth control drilling and routing using contact surface sensing, linear scale and mapping. X-ray and surface cameras for the most demanding registration requirements Solution for flip drilling, back drilling and sequential build up applications. Automatic loading-unloading system with bar code recognition to run the machine unmanned
  • The most advanced solution for high tech application A toolkit for your most complex multilayers boards Drilling, routing, x-ray optimiser (outer-layers and inner-layers), coordinates measures Real-time drilling assisted by x-ray targets detection Statistical analysis, graphics, reports All axis is driven by a linear motor for speed and accuracy. High speed spindles up to 250k rpm for micro drilling. Routing spindles up to 150K rpm for precision routing. Depth control drilling and routing using contact surface sensing, linear scale and mapping. X-ray and surface cameras for the most demanding registration requirements Solution for flip drilling, back drilling and sequential build up applications. Automatic loading-unloading system with bar code recognition to run the machine unmanned
  • CPA6151 Handling System für INKJET DRUCKER CPA is the handling system customized for the inkjet printer being used. MicroCraft InkJet-Printers stand for high-quality results with concise cycle times for various applications like legend Printing, Etch Resist and selective Solder Mask Printing. The handling system developed by MicroCraft is available for complete automation of the printing process.
    • The transport system was developed by MicroCraft for MicroCraft InkJet printers
    • Two different loading systems are available / Conveyor Type - Stacker Type
    • Easy to integrate in different conveyor systems
    • Flipping function
    • Robot systems can be offered as well
  • CPE6151 DIGITAL INKJET PRINTER MicroCraft InkJet-Printers stand for high-quality results with concise cycle times for various applications like legend Printing, Etch Resist, Plaiting Resist and even selective Solder Mask Printing.
    • High-speed printing heads: discharge frequency of up to 45 kHz and 1024 nozzles
    • 8 parallel printing heads to increase the throughput
    • “Automated Air Purge System“ prevents nozzle clogging
    • Selectable resolutions up to 2160 dpi
    • Serialisation and Barcode is possible
    • Loader and Unloader available (CPA)
  • CPF model is distinguished from other models by its usage of the latest print head offering 3.5pl droplet size with a total of 1776 nozzles to achieve the series' finest print quality. This model is most suitable for printing solder resist and etch resist inks.
  • This high speed model is equipped with a total of 2048 nozzles that has doubled the maximum discharge frequency compared to the conventional array used in CPK/CPM models. With its capability of changing print resolution in x-direction by 30dpi step, it allows operators to make precise adjustment to their print quality.
  • Super Large Size Model is capable of printing 1100x780mm work size, and this custom model is offered for each of CPi, CPJ, and CPL models. Print speed and quality is equivalent of these models in standard 6151/7861 size. This model is also installed with single direction printing with moving print head unit, where it moves front/rear direction.
  • CPI120110 DIGITAL INKJET PRINTER MicroCraft InkJet-Printers stand for high-quality results with concise cycle times for various applications like legend Printing, Etch Resist and even selective Solder Mask Printing.
    • High-speed printing heads: discharge frequency of up to 45 kHz and 1024 nozzles
    • 4 parallel printing heads for high throughput
    • “Automated Air Purge System“ prevents nozzle clogging
    • Selectable resolutions up to 2160 dpi
    • Serialisation and Barcode is possible
    • Supersize printing Table
    • Loader and Unloader available (CPA)
  • Standard Model is equipped with the same array installed in the CPi model. With its capability of changing print resolution in x-direction by 30dpi step, it allows operators to make precise adjustment to their print quality.
  • CPL uses conventional print array to cut down the cost to offer great cost performance.
  • The latest addition in the high speed model lineup is the CPQ, which is equipped with 4 print arrays on its customized machine body to achieve the industry's fastest print speed. Implementation of 2 CCD cameras also contributes in a fast printing speed by shortening the required alignment time. With its wide print stroke the board size of 22.8 x 17" (580 x 430mm) work can now be printed with just 12 seconds, which is even faster than the CPi model. The CPQ model is most suitable for legend printing.
  • CPQ7861 DIGITAL INKJET PRINTER MicroCraft InkJet-Printers stand for high-quality results with concise cycle times for various applications like legend Printing, Etch Resist and even selective Solder Mask Printing.
    • High-speed printing heads: discharge frequency of up to 45 kHz and 1024 nozzles
    • 4 parallel printing heads for high throughput
    • “Automated Air Purge System“ prevents nozzle clogging
    • Selectable resolutions up to 2160 dpi
    • Serialisation and Barcode is possible
    • Loader and Unloader available (CPA)
  • CPR3316 DIGITAL INKJET PRINTER MicroCraft InkJet-Printers stand for high-quality results with concise cycle times for various applications like legend Printing, Etch Resist and even selective Solder Mask Printing.
    • Max. printing size up to 1200 x 1100 mm
    • High-speed printing heads: discharge frequency of up to 45 kHz and 1024 nozzles
    • “Automated Air Purge System“ prevents nozzle clogging
    • Selectable resolutions up to 2160 dpi
    • Serialisation and Barcode are possible
    • Loader and Unloader available
  • CPS uses a special ink cartridge for supplying ink to the print head unlike the regular supply tanks used in other CraftPix models. This model is most suitable for customer using multiple types of inks in small quantity for making experiment lot or using highly expensive inks such as silver nano ink.

Title

Go to Top